Log masuk atau Mendaftar

Bahasa

Bahasa Indonesia

belakang

Produk

Kes & Penyelesaian

blog

MS

belakang

10HP/7.5KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

20HP/15KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

30HP/22KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

50HP/37KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

75HP/55KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

100HP/75KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

2-in-1 Screw air compressor @0.8Mpa/8bar/116psi [with air tank]

4-in-1 screw air compressor @0.8Mpa/1.6Mpa [with air tank]

Refrigerated dryer

Hot melt adhesive machine

FAQ

MS

Rumah > kasus > Chapter 7 Trial Operation and Acceptance of Screw Air Compressor

Chapter 7 Trial Operation and Acceptance of Screw Air Compressor

7-11 How to check the strength and tightness of auxiliary equipment under pressure?

7-11 How to check the strength and tightness of auxiliary equipment under pressure?

7-10 How is the strength and tightness test pressure of pressure-bearing auxiliary equipment specified?

7-10 How is the strength and tightness test pressure of pressure-bearing auxiliary equipment specified?

7-9 For auxiliary equipment that bears pressure, if the following conditions are met at the same time, strength test is not required?

7-9 For auxiliary equipment that bears pressure, if the following conditions are met at the same time, strength test is not required?

7-8 What requirements should be met when assembling the lubrication system?

7-8 What requirements should be met when assembling the lubrication system?

7-7 What requirements should be met for the temperature test after the screw compressor is tested?

7-7 What requirements should be met for the temperature test after the screw compressor is tested?

7-6 What inspections and records should be made during the trial operation of a screw compressor?

7-6 What inspections and records should be made during the trial operation of a screw compressor?

7-5 What requirements should be met during the trial operation of a screw compressor?

7-5 What requirements should be met during the trial operation of a screw compressor?

7-4 What are the steps for commissioning a screw compressor?

7-4 What are the steps for commissioning a screw compressor?

7-3 What should be noted when starting a screw compressor for the first time?

7-3 What should be noted when starting a screw compressor for the first time?

7-2 What are the inspection contents before the first start of the screw air compressor?

7-2 What are the inspection contents before the first start of the screw air compressor?

7-1 Why do screw compressors need to be tested?

7-1 Why do screw compressors need to be tested?

KATEGORI

Chapter 7 Trial Operation and Acceptance of Screw Air Compressor

7-11 How to check the strength and tightness of auxiliary equipment under pressure?

7-11 How to check the strength and tightness of auxiliary equipment under pressure?

7-10 How is the strength and tightness test pressure of pressure-bearing auxiliary equipment specified?

7-10 How is the strength and tightness test pressure of pressure-bearing auxiliary equipment specified?

7-9 For auxiliary equipment that bears pressure, if the following conditions are met at the same time, strength test is not required?

7-9 For auxiliary equipment that bears pressure, if the following conditions are met at the same time, strength test is not required?

7-8 What requirements should be met when assembling the lubrication system?

7-8 What requirements should be met when assembling the lubrication system?

7-7 What requirements should be met for the temperature test after the screw compressor is tested?

7-7 What requirements should be met for the temperature test after the screw compressor is tested?

7-6 What inspections and records should be made during the trial operation of a screw compressor?

7-6 What inspections and records should be made during the trial operation of a screw compressor?

7-5 What requirements should be met during the trial operation of a screw compressor?

7-5 What requirements should be met during the trial operation of a screw compressor?

7-4 What are the steps for commissioning a screw compressor?

7-4 What are the steps for commissioning a screw compressor?

7-3 What should be noted when starting a screw compressor for the first time?

7-3 What should be noted when starting a screw compressor for the first time?

7-2 What are the inspection contents before the first start of the screw air compressor?

7-2 What are the inspection contents before the first start of the screw air compressor?

7-1 Why do screw compressors need to be tested?

7-1 Why do screw compressors need to be tested?

Hubungi Kami: No. 49 Lianhe Road, Fulong Village, Shipai, Dongguan City, Guangdong Province; admin@dgscee.com; 18922776417

Surat berita: Lorem ipsum dolor si consectetur adipisicing elit, sed eiusmotempor incididunt ut labore et

Ikuti Kami

Copyright © 2005-2015 MySite Ltd. All Rights Reserved.

Tinggalkan mesej

First Name*

Last Name*

Email*

WhatsApp

Message*

CODE*

Kod Pengesahan