Log masuk atau Mendaftar

Bahasa

Bahasa Indonesia

belakang

Produk

Kes & Penyelesaian

blog

MS

belakang

10HP/7.5KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

20HP/15KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

30HP/22KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

50HP/37KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

75HP/55KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

100HP/75KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

2-in-1 Screw air compressor @0.8Mpa/8bar/116psi [with air tank]

4-in-1 screw air compressor @0.8Mpa/1.6Mpa [with air tank]

Refrigerated dryer

Hot melt adhesive machine

FAQ

MS

Rumah > kasus > Chapter 7 Trial Operation and Acceptance of Screw Air Compressor > 7-8 What requirements should be met when assembling the lubrication system?

KATEGORI

KATEGORI

7-8 What requirements should be met when assembling the lubrication system?

When assembling the lubrication system, avoid sharp bends/twists/flattening in oil pipes, ensure flexible operation of transmission mechanisms, test tightness of components at specified pressure, and exhaust/drain oil pipes before connecting.

7-8 What requirements should be met when assembling the lubrication system?

Butiran Kes

Answer: (1) The oil pipe should not have sharp bends, twists or flattening.

(2) The transmission mechanism connecting the crankshaft and the oil pump or the crankshaft and the oil injector should operate flexibly.

(3) After assembly, the pipelines, valves, filters and coolers of the lubrication system should be tested for tightness according to the pressure specified in the equipment technical documents. If there is no regulation, they should be tested at the rated pressure and there should be no leakage.

(4) The oil pipe should be exhausted and drained first, and then connected to the oil supply and lubrication point.

Sebelumnya

7-7 What requirements should be met for the temperature test after the screw compressor is tested?

Seterusnya

7-9 For auxiliary equipment that bears pressure, if the following conditions are met at the same time, strength test is not required?

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

INFRASTRUCTURE SCENARIO

INFRASTRUCTURE SCENARIO

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

TRANSPORTATION SCENARIOS

TRANSPORTATION SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

INDUSTRIAL SCENARIOS

INDUSTRIAL SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

Hubungi Kami: No. 49 Lianhe Road, Fulong Village, Shipai, Dongguan City, Guangdong Province; admin@dgscee.com; 18922776417

Surat berita: Lorem ipsum dolor si consectetur adipisicing elit, sed eiusmotempor incididunt ut labore et

Ikuti Kami

Copyright © 2005-2015 MySite Ltd. All Rights Reserved.

Tinggalkan mesej

First Name*

Last Name*

Email*

WhatsApp

Message*

CODE*

Kod Pengesahan