KATEGORI

6-7 Briefly describe the treatment method for long-term shutdown of screw air compressors.

For long-term shutdown of screw air compressors, drain condensates, fix faults, seal openings, wrap with oil paper, replace lubricating oil, and drain cooling water based on shutdown duration.

Butiran Kes

Answer:
(1) Shutdown for more than 3 weeks:

1) Drain the condensate in the oil cooler and aftercooler;

2) If there is any fault, it should be eliminated first for future use;

3) Drain the condensate in the oil drum, oil cooler, and aftercooler.

(2) Shutdown for more than 2 months (in addition to the above procedures, the following treatment is required):

1) Seal all openings to prevent moisture from entering;

2) Wrap the safety valve and control panel with oil paper to prevent rust;

3) Replace the lubricating oil before shutdown and run for 30 minutes. After two days, drain the condensate in the oil drum and cooler;

4) Drain all cooling water.

Sebelumnya

6-6 In what situations should the screw compressor be stopped during operation?

Seterusnya

6-8 What are the responsibilities of screw compressor operators?

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.