KATEGORI

5-34 What should be paid attention to when replacing the oil seal of an air compressor?

When replacing the oil seal of an air compressor, be cautious to avoid leakage. Pay attention to installation direction, cleanliness, lubrication, sleeve surface, use of original parts, and pre-replacement checks.

Butiran Kes

Answer: If you are not careful when replacing the oil seal of an air compressor, the replaced seal will still leak. Therefore, pay attention to the following matters to ensure the normal use of the replaced oil seal; The seal installation direction must not be wrong; Prevent foreign matter and dust from entering the seal and causing leakage during installation; Apply lubricating oil to the shaft diameter during assembly to avoid damage to the seal during installation; Scratches on the surface of the sealing sleeve cause leakage; The surface roughness of the sleeve is not appropriate; Use the original oil seal of the original manufacturer, as substitute oil seals are often prone to leakage; Check and confirm that there are no abnormalities in the shaft diameter and positioning bearing before replacement.

Sebelumnya

5-33 Why does the oil seal leak easily if the air compressor outlet check valve is not closed tightly?

Seterusnya

5-35 Which parts of the screw air compressor are prone to oil leakage?

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.