KATEGORI

4-6 Explain the starting process and emergency shutdown of the air compressor motor.

When the motor starts, it operates in reduced pressure or Y mode, with the air compressor in a no-load state. After 2s, it switches to full pressure. If the exhaust temp exceeds 100℃ or the motor overloads, the power is cut, the motor stops, valves close, and compressed air is released.

Butiran Kes

Answer:
When the start button of the motor is operated, the motor starts. At this time, the motor is in reduced pressure or Y operation. During this period, the air compressor continues to be in a no-load state. The air intake side of the air compressor is highly vacuumed. The lubricating oil required for the air compressor and bearings is ensured by the vacuum in the air compressor room and the atmospheric pressure difference in the oil and gas tank. After about 2s, the motor starts to run in a delta state, the control system cuts into the full pressure state, and the air compressor intake valve opens.

When the exhaust temperature of the air compressor exceeds 100℃ or the thermal protection device of the motor is activated due to overload, the power supply will be cut off, the motor will stop immediately, and the three-way solenoid valve and the air intake valve will be closed, and the discharge valve will be fully opened to discharge the compressed air in the system into the atmosphere.

Sebelumnya

4-5 What operating buttons and alarm functions are there on the microcontroller control panel of a screw air compressor?

Seterusnya

4-7 What is the overload protection of the motor?

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.