Log masuk atau Mendaftar

Bahasa

Bahasa Indonesia

belakang

Produk

Kes & Penyelesaian

blog

MS

belakang

10HP/7.5KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

20HP/15KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

30HP/22KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

50HP/37KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

75HP/55KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

100HP/75KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

2-in-1 Screw air compressor @0.8Mpa/8bar/116psi [with air tank]

4-in-1 screw air compressor @0.8Mpa/1.6Mpa [with air tank]

Refrigerated dryer

Hot melt adhesive machine

FAQ

MS

Rumah > kasus > Chapter 12 Introduction to Standards and Specifications for Screw Air Compressors > 12-13 What are the requirements for heating and ventilation in the compressed air station design specification?

KATEGORI

KATEGORI

12-13 What are the requirements for heating and ventilation in the compressed air station design specification?

Compressed air stations with centralized heating must maintain a minimum machine room temp of 15℃ and duty room temp of 5℃ during non-working hours. Summer air temp within 2m of the ground must comply with GBZ 1-2002. Soundproof rooms need ventilation/cooling.

12-13 What are the requirements for heating and ventilation in the compressed air station design specification?

Butiran Kes

Answer: (1) For a compressed air station with centralized heating, the heating temperature of the machine room should not be lower than 15℃, and the heating temperature of the duty room during non-working hours should not be lower than 5℃.

(2) The summer air temperature of the space within 2m above the ground of the entire machine room should comply with the requirements for work locations in the workshop in GBZ 1-2002 "Industrial Enterprise Design Hygiene Standards".

(3) The soundproof duty room should be equipped with ventilation or cooling devices.

Sebelumnya

12-12 What are the requirements for the cooling water quality of air compressors and aftercoolers in the compressed air station design specifications?

Seterusnya

12-14 What are the requirements of the compressed air station design specification for compressed air pipelines?

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

INFRASTRUCTURE SCENARIO

INFRASTRUCTURE SCENARIO

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

TRANSPORTATION SCENARIOS

TRANSPORTATION SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

INDUSTRIAL SCENARIOS

INDUSTRIAL SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.

Hubungi Kami: No. 49 Lianhe Road, Fulong Village, Shipai, Dongguan City, Guangdong Province; admin@dgscee.com; 18922776417

Surat berita: Lorem ipsum dolor si consectetur adipisicing elit, sed eiusmotempor incididunt ut labore et

Ikuti Kami

Copyright © 2005-2015 MySite Ltd. All Rights Reserved.

Tinggalkan mesej

First Name*

Last Name*

Email*

WhatsApp

Message*

CODE*

Kod Pengesahan